Home / Device types / Pressure sensor / Home Assistant

Matter pressure sensor on Home Assistant

For pressure sensors, Home Assistant supports pairing, control and automation triggers. It does not support automation actions. Our confidence in this answer is Med.

Med confidence

2026-10-22 last checked

3/4 capabilities confirmed

At a glance

Answer	Home Assistant
Pairing	Y
Control	Y
Starts an automation	Y
Controlled by an automation	N
Confidence	Med
Matter spec	1.0+

Y = confirmed for this device type, Partial = works with limits, N = not supported by this platform, Unknown = not enough dated evidence. These are type-level answers, not a guarantee for one product.

What this means

All four answers are confirmed for this device type on this platform. Individual products can still implement less than the device type — check the product notes before you buy.

Requirements

Hub requirement: Home Assistant Matter Server (HA OS recommended). Thread border router for Thread devices.

Matter spec: 1.0+.

Confidence

The evidence is a mix of official platform documentation and product- or community-level reports; some answers rest on documentation alone.

Last checked 2026-10-22. Last change 2026-10-18 (confidence: High → Med). The answers above come from the published type matrix; the sources below are what they rest on.

Sources

home-assistant.io · official · 2026-10-18
home-assistant.io · official · 2026-10-18
raw.githubusercontent.com · official · 2026-10-16

Frequently asked questions

Does a Matter pressure sensor work with Home Assistant?

Home Assistant pairs a Matter pressure sensor and shows its pressure reading. Med confidence, checked 2026-10-22. Home Assistant can control a Matter pressure sensor from its app, including the pressure reading (Med, checked 2026-10-22).

Can a Matter pressure sensor trigger a Home Assistant automation?

Yes — a pressure threshold on a Matter pressure sensor can start a Home Assistant automation. As an action, Home Assistant cannot use a Matter pressure sensor in an automation (Med, checked 2026-10-22).

Do I need a hub for a Matter pressure sensor on Home Assistant?

Home Assistant needs a Matter controller before a Matter pressure sensor will report.

Next steps

All Home Assistant answers for pressure sensors, side by side — the full pressure sensor matrix across every platform.
Compare Home Assistant with another platform — pairing, control, triggers and actions in one table.
Check whether your setup will work — answer a few questions and get a verdict with caveats.
Matter products of this type — tested products with their own notes and sources.
Matter on Home Assistant: every device type
All platforms compared
How to check Matter certification
Matter firmware updates on each platform
How we check — evidence rules, confidence ratings and how often we re-check.

Other platforms for pressure sensors

Apple Home — no confirmed support High
Google Home — supports pairing and control Med
Amazon Alexa — no confirmed support High
SmartThings — supports pairing, control and automation triggers Med
Homey — supports pairing, control and automation triggers Med
Hubitat — no confirmed support Med

Informational only — verify before you buy. How we check · All pressure sensors across platforms