Does Google Home support Matter? Which Matter devices work with Google Home
Yes. Google Home supports Matter through a Matter-enabled Google hub, such as a Nest speaker or display, Nest Wifi Pro, or Google TV Streamer — and you can't add Matter devices without one. MatterCheck rates Google Home as pairing 21 of the 24 Matter device types we track, with appliances partly supported; 17 of those types can start a Google Home automation, more than Apple Home or Amazon Alexa but fewer than SmartThings and Home Assistant. 11 of the 24 rows are High confidence.
What you need: a Matter-enabled Google hub
Google requires a Matter-enabled hub before you can add Matter devices, so there is no Matter support in Google Home without a hub. The hub also enables local and remote control. The Wi-Fi-only Matter hubs are Nest Audio, Nest Mini, and Nest Hub (1st gen). Our hub list names the Nest Mini; it has no separate entry for the older Google Home Mini.
The hubs that also act as Thread border routers are Google Home Speaker (2026), Nest Hub (2nd gen), Nest Hub Max, Nest Wifi Pro (6E), and Google TV Streamer (4K). Wi-Fi and Ethernet Matter devices don't need a Thread border router; Thread devices do. For most people, a Matter-enabled Google hub is the first thing to check. Google's Google Nest help: Matter hubs page is the source for the hub list, and the Google Home help: Matter devices page says IPv6 must be enabled on your home network.
Google Home Matter support at a glance
In the table below, Yes means Google Home does that, No means it doesn't, Partial means only some devices or features work. No Google Home field is Unknown. High confidence means MatterCheck found an official Google statement plus a dated hands-on test of that device type on Google Home; Med means the value rests on weaker evidence, such as official documentation only, owner reports, or an AI-labelled Google release note.
The full 24-row matrix is on the MatterCheck home page, and Google's Matter supported-devices table is the official starting point.
| Device type | Pairs with Google Home | Control in app or voice | Starts a Google Home automation | Automation can control it | Confidence |
|---|---|---|---|---|---|
| On/off light | Yes | Yes | Yes | Yes | High |
| Dimmable / colour light | Yes | Yes | Yes | Yes | High |
| Tunable white (colour temperature) light | Yes | Yes | Yes | Yes | Med |
| Plug / outlet | Yes | Yes | Yes | Yes | High |
| Switch / button | Yes | Partial | Yes | No | Med |
| Contact (door/window) sensor | Yes | Yes | Yes | No | High |
| Motion / occupancy sensor | Yes | Yes | Yes | No | High |
| Temperature / humidity sensor | Yes | Yes | Yes | No | High |
| Leak sensor | Yes | Yes | Yes | No | Med |
| Smoke / CO alarm | Yes | Yes | Yes | No | High |
| Door lock | Yes | Partial | Yes | Partial | High |
| Thermostat | Yes | Yes | Yes | Yes | Med |
| Blinds / shades (window covering) | Yes | Yes | Yes | Yes | High |
| Fan / air purifier | Yes | Yes | Yes | Yes | High |
| Robot vacuum | Yes | Yes | Yes | Yes | High |
| Appliances | Partial | Partial | Partial | Partial | Med |
| Air quality sensor | Yes | Yes | Partial | No | Med |
| Light sensor | Yes | Yes | Partial | No | Med |
| Pump | Yes | Yes | Yes | Yes | Med |
| Water valve | No | No | No | No | Med |
| Energy meter | Yes | No | No | No | Med |
| Speaker | Yes | Yes | Yes | Yes | Med |
| Water heater | No | No | No | No | Med |
| Pressure sensor | Yes | Yes | No | No | Med |
What works well with Google Home over Matter
Lights. Google lists on/off, dimmable, color temperature, and extended color lights in its Matter supported-devices table. The on/off light row is High: Smart Home Centre's 2025-11-30 test added IKEA KAJPLATS bulbs directly to Google Home and controlled them like other lights, and every Matter light includes on/off; TechRadar's 2023-09-28 test also switched a Nanoleaf Matter Essentials bulb off/on. The dimmable/colour light row is High: TechRadar's 2023-09-28 test added a Nanoleaf Matter Essentials colour bulb to a Nest Hub 2 and changed colour with Google Home automations; the KAJPLATS bulb is white spectrum, so it doesn't count for colour. The color temperature light row is Med because no dated test on Google Home shows the white tone actually changing. A 2026 Google Home bug stopped colour changes on some bulbs; reports date to April 2026, Google said a fix was rolling out on 2026-10-07, and the brands named mostly connect through their own cloud, not Matter. See the Matter light bulb guide.
Plugs. Google supports Matter on/off plug-in units. 9to5Google's 2023-05-25 test of a TP-Link Kasa KP125M controlled it in Google Home, and Android Police's 2026-05-02 test used an Eve Energy plug with Google Home automation triggers. The smart plug guide has the row-by-row comparison.
Contact, motion/presence and temperature/humidity sensors. These are High confidence because Google's automation starters list names opened/closed, occupancy, temperature and humidity-level starters, and independent tests back them up. Android Police's 2026-08-03 test used a Matter mmWave presence sensor as a native Google Home trigger, and How-To Geek's 2026-02-02 review used an IKEA TIMMERFLOTTE with Google Home automations. See the contact sensor and motion sensor guides.
Smoke/CO alarms. Google lists Matter smoke and carbon monoxide detectors. MESH's 2026-04-26 Sensereo MSC-1 hands-on shared the alarm into Google Home, but found no CO status or CO level display. The smoke and CO guide explains the caveat.
Blinds, fans and robot vacuums. Window coverings are High after Wirecutter's 2026-05-08 report found SmartWings Matter shades reliable in Google Home, and SmartHomeScene added Graywind shades with a position slider. Fans are High for on/off and speed control, but the app editor only offers on/off starters. Robot vacuums are High after MESH's 2025-12-24 Roborock Qrevo C Pro hands-on. See the blinds and robot vacuum guides.
Which Matter devices can start a Google Home automation?
17 of the 24 types can start a Google Home automation: on/off lights, dimmable/color lights, color temperature lights, plugs, buttons, contact sensors, motion/occupancy sensors, temperature/humidity sensors, leak sensors, smoke/CO alarms, door locks, thermostats, window coverings, fans/air purifiers, robot vacuums, pumps, and speakers.
Buttons and switches. Matter buttons pair into Google Home and appear as their own device. Press patterns can start automations — single, long, multi-press and long-press release are documented in Google Home Help and release notes. Matter Alpha's 2026-02-05 how-to used IKEA BILRESA single and double press as Google Home automation starters. But buttons have nothing to control, so the action is N and control is Partial. This row is Med because the control Partial rests on Google release notes labelled as AI-generated, which count only as corroboration. See the Matter Alpha hands-on and the Google Home automation starters and actions page.
Leak sensors. Google Home Help added Leak/No Leak starters on 2026-02-02. Owner reports from 2026-01-26 and 2026-03-08 show IKEA KLIPPBOK sensors starting Google Home automations. The row is Med because Google's Matter developer device list still has no water leak detector row and the starter evidence is owner reports, not independent hands-on reviews. Google doesn't send a native leak notification, so you build the alert as an automation yourself. Thermostats are Med for a different reason: Google Home Help added a thermostat local-temperature starter on 2025-09-10 and a set mode/temperature action on 2025-10-01, but no independent test shows a Matter thermostat added directly to Google Home and controlled or automated there. See the leak sensor and thermostat guides.
Partial starters. Air quality and light level only work in Google's Script Editor, not the Google Home app automation builder, so MatterCheck rates them Partial. A GL.iNet forum owner reported a Script Editor light-level starter below 100 lux works for a Matter-over-Thread sensor, but there is no professional test. Appliances are also Partial: Google says it added Matter dishwashers, washers and dryers, and its app editor has an appliance running/stopped starter for select devices only, but no native Matter appliance has been tested in Google Home. See the GL.iNet forum owner report.
No starter. Pressure sensors, energy meters, water valves and water heaters cannot start a Google Home automation. For reliable starters, stick to the High rows. For air quality or light level, use the Script Editor or a second platform.
Google Home automation actions: the limits
Google Home can use fewer types as automation actions than as starters. The 10 full action types are the three light types (on/off, dimmable/colour and tunable white), plugs, thermostats, window coverings, fans/air purifiers, robot vacuums, pumps and speakers. Two are Partial: door locks and appliances.
Door locks. A Google Home automation can lock a lock, but remote unlock without a PIN and voice unlock are disabled. Lock action is not supported for PIN-required locks, which is why the action is Partial. 9to5Google's 2025-09-22 hands-on used a Yale Smart Lock with Matter in Google Home.
Robot vacuums. A Google Home automation can pause, resume, or dock a robot vacuum, but the app editor has no start action. Broader StartStop/Dock commands exist only in the Script Editor. MESH's Roborock Qrevo C Pro hands-on reported no stop or locate in Google Home.
Fans, speakers, appliances and pumps. Google's automation catalog lists fan speed and on/off commands, but the app editor is on/off only. Speaker actions cover volume and on/off only, not mute or media playback. Appliances have start/stop actions on select devices. Pump actions are inferred from generic on/off wording, so that row is Med. See the Google Home automation starters and actions page for the official wording.
Matter devices Google Home doesn't support, or only partly
Google Home has two N rows for pairing: water valves and water heaters. Google's developer device list has no row for either and says unlisted types are not officially supported, but MatterCheck rates these Med because the same list also omits leak sensors that Google Home supports. The only certified Matter valve maker claims Google Home works, but that's a maker claim, not an independent test. Google's Matter clusters page maps Valve Configuration and Control to OpenClose, so the valve omission isn't explicit proof, and has no Water Heater Management or Mode mapping.
Energy meters are recognized but not controllable: Google's supported-devices table lists Electric Meter with control N/A, and there is no energy or power starter. Pressure sensors pair and show readings, but no pressure starter exists in the app or Script Editor examples. Appliances are Partial: Google's supported-devices table lists dishwashers and laundry washers, Google's release notes say it added Matter dishwashers, washers and dryers, the app editor's running/stopped starter and start/stop action cover select devices only, and we found no test of a native Matter appliance added directly to Google Home.
How Google Home compares with other Matter platforms
Google Home pairs 21 of 24 types. Apple Home pairs 17, Amazon Alexa pairs 16, SmartThings pairs 24, and Home Assistant pairs 24. For starting automations, Google Home supports 17 types, Apple Home supports 14, Alexa supports 6, SmartThings supports 23, and Home Assistant supports 24. Google Home has 11 High confidence rows; Apple Home has 15, Alexa has 4, SmartThings has 15, and Home Assistant has 18.
So Google Home is strong on documented starters and pairs more types than Apple Home or Amazon Alexa. SmartThings and Home Assistant pair every type we track, and Apple Home has more High-confidence rows. Google publishes its automation starters and actions list, which is why no Google Home field is Unknown. Most of Google's Med rows lack a dated hands-on test or rest on a type the supported-devices table omits. See the MatterCheck matrix or the Alexa guide and Apple Home guide for the same 24-row check on Amazon Alexa and Apple Home, or the five-platform Matter comparison to see Google Home next to Apple Home, Alexa, SmartThings and Home Assistant.
Use Google Home alongside another platform
Matter multi-admin lets one device join Google Home and another platform at the same time. This is how you'd use a Nest Hub-paired device in Home Assistant, Apple Home, SmartThings or Alexa too. Each platform needs its own Matter hub or controller. To share from Google Home, touch and hold the device tile, then Settings > Linked Matter apps & services > Link apps & services, or use Use pairing code / Share with QR code. Google says the code lasts about three minutes; TP-Link's sharing guidance says the same.
Don't reuse the printed QR or setup code for a second platform — make a new pairing code in the app the device is already in. Changes sync across apps, so turning a light off in Google Home shows off in the other app. To remove, use Remove device in Google Home; Google suggests a factory reset if you stop using it. See the Google Home help: Matter devices page and the multi-admin guide.
Device guides
- Matter light bulb support: Google Home pairs on/off, dimmable/color and color-temp lights, but the tunable white row is Med because no test shows the white tone changing.
- Matter smart plug support: plugs are High with app control and automation.
- Matter contact sensor support: contact sensors are High and can start Google Home automations.
- Matter motion sensor support: occupancy is High and works as a native app-editor trigger.
- Matter thermostat support: thermostat pairs with official starter/action wording, but is Med because no independent Google Home hands-on exists.
- Matter smoke and CO alarm support: High for pairing and status, with no CO status/level shown in one test.
- Matter smart lock support: High overall, but control and action are Partial because of unlock limits.
- Matter blinds and shades support: High for open/close and position in Google Home.
- Matter robot vacuum support: High with a docking starter, but no start action in the app editor.
- Matter leak sensor support: Google Home pairs leak sensors and can start Google Home automations, but the row is Med.
- Does Alexa support Matter?: the same 24-row check for Amazon Alexa.
- Does Apple Home support Matter?: the same 24-row check for Apple Home.
- Apple Home vs Google Home vs Alexa for Matter: all five platforms side by side, row by row.
How we checked
These values are from MatterCheck matrix v1.14. Google Home values were last checked between 2026-10-17 and 2026-10-19. High confidence requires an official statement covering the feature plus a dated hands-on test of the device type on that platform. A starter that only works in Google's Script Editor stays Partial, never Yes, which is why air quality and light level are Partial. AI-labelled Google pages count only as corroboration, not as the main official statement. See the methodology and device type pages for the full rules.
Last reviewed 2026-10-19. Google Home's Matter support changes with app and hub updates; check the live matrix and device type pages for current values.