← All guides

LIFX and Matter: which lights and switches work, and how to check yours

By Rowan Hale, editor (pen name) · Reviewed 2026-10-26

Most new LIFX products ship with Matter enabled out of the box, according to LIFX's support article, but some older SuperColor bulbs only support Matter in their LCM4 edition — and the way to tell is the firmware number. LIFX also lists a set of older LCM3 devices that are planned to receive Matter firmware updates over the next few months. The lists below come from LIFX's own published compatibility article and the CSA certification ledger, so treat them as LIFX's current plan rather than a promise.

Which LIFX products have Matter built in

LIFX's support article says the majority of new LIFX products now ship with Matter enabled, meaning they support the Matter smart home protocol right out of the box with no firmware update required. That pre-installed list covers a wide spread of bulbs, strips, ceiling lights, downlights and outdoor fixtures. Some entries are marked "LCM4 Edition Only" — for those, the same model number can exist in an older LCM3 version that does not have Matter, so the firmware check in the next section matters.

The pre-installed Matter list from LIFX's Matter compatibility article includes:

• Everyday range: LIFX Everyday Lightstrip and LIFX Everyday 800lm Smart Light.
• SuperColor bulbs and lamps: SuperColor Luna Lamp, SuperColor 1600lm Smart Light (including AU B22 and E27 variants), SuperColor 1600lm PAR38 Flood Light (including AU variants), SuperColor 1100lm Smart Light (LCM4 Edition only, A19 and BR30 parts), SuperColour 1200lm Smart Light (LCM4 Edition only, AU E27 and B22 parts), SuperColor 800lm Smart Light (LCM4 Edition only), SuperColour 950lm Smart Light (AU E27 and B22), SuperColor Tube, and SuperColor Candle (LCM4 Edition only parts plus LFX/ETF).
• Ceiling and downlights: SuperColor Ceiling Light 15" and 26", SuperColor 6" Downlight, SuperColor 4" Downlight, and SuperColor 5-6" Downlight.
• Outdoor: SuperColor String Light (LCM4 Edition only), Outdoor SuperColor Permanent Lights, Outdoor SuperColor Path Light, Outdoor SuperColor Spot Light, and Outdoor SuperColor Neon Flex.

Region variants appear throughout — for example the 1600lm Smart Light has AU B22 and E27 versions, and the PAR38 has AU and AU/B22 versions. If you are comparing a box in a store, the model codes above are the authoritative list from LIFX's support article. MatterCheck also tracks LIFX products by SKU; see the MatterCheck SKU index for product-level records.

How to tell if your LIFX light is an LCM4 edition

LIFX's support article gives a practical rule: open Light Settings in the LIFX app and check the firmware number. All LCM4 models have a version number starting with v4. If the firmware version starts with v3, it will not support Matter — even if the model number appears on the pre-installed list above. That is because LIFX reused some model numbers across LCM3 and LCM4 hardware generations, and only the LCM4 hardware shipped with Matter.

This check matters most for the SuperColor 1100lm, SuperColour 1200lm, SuperColor 800lm and SuperColor Candle entries marked "LCM4 Edition Only". A v4 firmware number is the signal that you have the Matter-capable hardware; a v3 number on one of those models means you have the older generation. LIFX's support section also has an article titled "Check if Your LIFX Light Supports Matter" for a guided check.

LIFX devices waiting for a Matter update

LIFX's support article says it is working to provide Matter firmware updates to all existing LIFX devices that are capable of supporting it, but Matter is more resource intensive and not every device type can run it. The upgradeable list is LIFX's plan "over the next few months" — not an update that is available today. The listed devices are LCM3 editions, and LIFX says to check the firmware number: all LCM3 models have a version starting with v3, and if the firmware starts with v2 it will not support a Matter update.

The planned upgradeable list includes:

• LIFX Beam — LCM3 Edition only, including US, IN and CA kits.
• LIFX Lightstrip — LCM3 Edition only, including EK, SK and TV kits in CA, US and AU variants.
• LIFX Smart Switches — LFSP and LFSW models in US and AU variants, with a caveat: a small batch of Smart Switches sold in Australia and New Zealand will not support the update, and those switches will not show an update option in the app.
• LIFX SuperColor Neon Flex (Indoor) — LCM3 models in US, CA and AU variants, including 16 and 6.5 sizes.
• LIFX SuperColor String Light — LCM3 Edition only, with the update timeline listed as pending.

If you own one of these, the firmware number is the first thing to check: v3 means LIFX's plan includes it, v2 means it will not get a Matter update. The ANZ Smart Switch batch exception is worth checking before you assume an update will arrive.

LIFX switches and Matter

MatterCheck tracks three LIFX switch records from the CSA's certification ledger: Switch (Part SWUS1G1), Switch Intl (Part SWAU1G1), and Dimmer Switch (Part LFXB/DIM). The Switch and Switch Intl records are certified 2026-08-27, and the Dimmer Switch record is certified 2026-06-11 with Matter 1.4.2. These are separate from the older "LIFX Smart Switches" (LFSP/LFSW models) that LIFX's support article lists as upgradeable — do not equate the two groups. The CSA ledger records are the certification evidence for the newer switch hardware; the support article's switch list is LIFX's plan for older hardware.

For how Matter light switches behave across platforms, see our guide to Matter light switch support. To verify any CSA certification claim yourself, see how to check CSA certification.

Do you need a hub for LIFX with Matter

LIFX's Matter page says "No hub needed" and "Straight to Wi-Fi, set up in minutes", and its comparison table lists "No bridge, no hub" as a LIFX point against typical smart bulbs. CSA product pages for the Dimmer Switch, Switch, BR30, and Neon also state these LIFX products connect to your home network with Wi-Fi. The platform pages describe different requirements on the controller side: Apple says a home hub is recommended and needed for remote access and automations, Google says a Matter-enabled hub device is required, Amazon says a compatible Alexa hub or device is needed, SmartThings says a supported Matter controller is required, and Home Assistant needs its Matter Server.

LIFX Matter products connect over Wi-Fi, not Thread, so you don't need a Thread border router to use them. The platform requirements above still apply, because Apple, Google, Amazon and SmartThings each need their own Matter controller in the home.

For the difference between Thread and Wi-Fi transports and why it changes what hardware you need, see Thread vs Wi-Fi for Matter. For what counts as a hub or Thread border router on each platform, see Matter hubs and Thread border routers.

Using LIFX Matter lights with Apple Home, Google Home, Alexa, SmartThings and Home Assistant

Apple Home

Apple's Matter page says the Home app supports lights, and Matter accessories can be added by scanning a code or holding an iPhone near the accessory. With iOS 18 or later an iPhone can add and control Matter accessories without a home hub, but Apple recommends a home hub for the best experience. Because LIFX Matter products use Wi-Fi, the Thread requirements on that page don't apply to them. MatterCheck's dimmable color light record for Apple Home shows pairing, control, automation triggers and automation actions all supported with high confidence. LIFX's support section has an article titled "Set Up LIFX Matter Lights with Apple Home". See our Apple Home Matter guide for the full detail.

Google Home

Google's Matter page says you need a Matter-enabled hub device set up on your home network before adding Matter devices, and that IPv6 must be enabled for Matter to work properly. Google lists Dimmable Light, Color Temperature Light and Extended Color Light on its Matter device table, and MatterCheck's Google Home record for dimmable color lights shows pairing, control, automation triggers and automation actions all supported with high confidence. See our Google Home Matter guide.

Alexa

Amazon's Matter page says to connect a Matter device using the Alexa app, install the device within 30 ft of a compatible Alexa hub or device, and scan the Matter QR code or enter the pairing code. MatterCheck's Alexa record for dimmable color lights shows pairing and control supported, automation actions supported, and automation triggers partial, with medium confidence. See our Alexa Matter guide.

SmartThings

SmartThings' Matter page says you need a Matter controller, and for Thread devices a Matter controller that includes a Thread border router. The SmartThings app acts as the Matter commissioner during onboarding, and the Matter badge on packaging indicates whether a Thread border router is needed. MatterCheck's SmartThings record for dimmable color lights shows pairing, control, automation triggers and automation actions all supported with high confidence. See our SmartThings Matter guide.

Home Assistant

Home Assistant's Matter docs say most Matter devices use Bluetooth during commissioning, then communicate over their native interface — Wi-Fi or Thread. Home Assistant uses the Companion app for commissioning, and supports multi-fabric so a LIFX light can be joined to Home Assistant alongside Apple Home or Google Home. MatterCheck's Home Assistant record for dimmable color lights shows pairing, control, automation triggers and automation actions all supported with high confidence. See our Home Assistant Matter guide.

For the general add-a-device flow across platforms, see how to add a Matter device. For sharing one LIFX light across several platforms, see Matter multi-admin and sharing.

What MatterCheck's data says for color lights and switches

MatterCheck tracks 9 LIFX products out of 393, and its results are per Matter device type and platform — not tests of LIFX products specifically.

Matter color light results

MatterCheck's results for the Matter color light device type (Matter color light page), per device type and platform, not a test of LIFX products.

Matter switch or button results

MatterCheck's results for the Matter switch or button device type (Matter switch or button page), per device type and platform, not a test of LIFX products.

Across Apple Home, Google Home, Alexa, SmartThings, Home Assistant, and Homey, Matter color lights pair and control, with automation triggers and actions supported everywhere except Alexa, where the trigger is only partial; Hubitat remains unknown. For the Matter switch or button type, pairing works on all platforms except Hubitat, control is partial, automation triggers are supported, and automation actions are not. Note that this switch row covers the general Matter switch/button device type, where control of a pure button is limited, so results for LIFX wall switches and dimmers, which switch a connected load, may differ; these are not tests of LIFX products.

When a LIFX light won't show up in Matter

If a LIFX light is not appearing as a Matter device, work through these checks from the sources above:

• Check the firmware number. On pre-installed-list models, v4 means LCM4 and Matter-capable; v3 means no Matter. On upgradeable-list models, v3 means LIFX's plan includes it, v2 means no update.
• Check whether your model is on the upgradeable list rather than the pre-installed list. Upgradeable devices are waiting on LIFX's planned firmware update, not available now.
• Check the ANZ Smart Switch batch exception. A small batch of Smart Switches sold in Australia and New Zealand will not get the update and will not show an update option.
• Check the string light timeline. The LCM3 SuperColor String Light update timeline is pending.
• Check your platform's hub or controller requirement. Google, Amazon, SmartThings and Home Assistant each require a Matter controller or hub; Apple recommends one for the best experience.
• Check IPv6 on your network for Google Home. Google says Matter can fail without IPv6 enabled.
• Check the pairing code or QR code is available. Home Assistant's docs say you need the QR code or numeric setup code to commission a device again after a reset.

If those checks pass and the light still will not pair, see what to do when a Matter device won't pair. If you have lost the setup code, see finding a lost Matter setup code. If you need to start over, see removing and factory resetting a Matter device. LIFX's support section also has an article titled "Troubleshooting Matter Setup and Discovery in the LIFX App".

Frequently asked questions

Does LIFX work with Matter?

Yes, for the products LIFX lists as shipping with Matter pre-installed. LIFX's support article says the majority of new LIFX products now ship with Matter enabled out of the box. Some older models are on LIFX's planned upgrade list, and some older hardware will not get Matter at all.

Which LIFX bulbs support Matter?

The pre-installed list includes the Everyday 800lm Smart Light, SuperColor 1600lm, SuperColor 1100lm (LCM4 only), SuperColour 1200lm (LCM4 only), SuperColor 800lm (LCM4 only), SuperColour 950lm, SuperColor PAR38, SuperColor Candle, SuperColor Tube, and the SuperColor Luna Lamp. Check the firmware number to confirm an LCM4 edition where LIFX marks it.

Will my older LIFX light get Matter?

LIFX's support article lists Beam, Lightstrip, Smart Switches, Indoor Neon Flex and String Light as planned for Matter updates over the next few months, but only for LCM3 editions with firmware starting v3. Firmware starting v2 will not support a Matter update. The string light timeline is pending, and a small ANZ Smart Switch batch will not get the update.

Do LIFX Matter lights need a hub?

LIFX's Matter page says no hub is needed and describes straight-to-Wi-Fi setup. The platform pages describe controller-side requirements: Google, Amazon, SmartThings and Home Assistant each need a Matter controller or hub, and Apple recommends a home hub for the best experience. What you need depends on the platform you are adding the light to.

Does LIFX work with Home Assistant over Matter?

Home Assistant's Matter docs describe adding Matter devices through the Companion app over Bluetooth during commissioning, then control over the device's native interface. MatterCheck's dimmable color light record for Home Assistant shows pairing, control, automation triggers and automation actions all supported with high confidence. LIFX's Matter page also lists Home Assistant as an integration.

Do LIFX switches support Matter?

The CSA ledger shows three LIFX switch records: Switch, Switch Intl and Dimmer Switch, with certification dates in 2026. LIFX's support article separately lists older LIFX Smart Switches as planned for a Matter update, with an ANZ batch exception. The two groups are not the same hardware.

More MatterCheck guides

• Matter light bulb support — how dimmable and color bulbs behave across platforms.
• Matter light switch support — what switches and buttons can and cannot do.
• Philips Hue and Matter — how Hue's bridge-based setup compares.
• Nanoleaf and Matter — Nanoleaf's Matter device list and platform notes.
• WiZ and Matter — WiZ's Matter support and firmware caveats.
• Govee and Matter — which Govee lights carry Matter.
• Matter hubs and Thread border routers — what counts as a controller on each platform.
• Matter vs HomeKit — how the two standards relate.
• Matter platform comparison — Apple Home, Google Home, Alexa, SmartThings and Home Assistant side by side.

How we checked

LIFX's Matter compatibility article and LIFX's Matter page were fetched 2026-10-26, and the CSA certification ledger records were fetched the same day. The Apple, Google, Amazon, SmartThings and Home Assistant Matter pages were fetched 2026-10-20. LIFX's claims about its own products are LIFX's own; MatterCheck's results are per device type and platform, not tests of LIFX products. See our methodology for how those results are derived.

Last reviewed 2026-10-26. If LIFX's or your platform's own instructions say something different, follow them.

This guide was drafted by AI from the dated sources linked above and checked against them by automated fact-check passes before publishing. How our content is made.